Baby Carriage Lift up and Down Test Machine Durabiliy Test for Handle Strength

Baby Carriage Lift up and Down Test Machine Durabiliy Test for Handle Strength

Description:

This machine is suitable for hand push Baby Carriage beyond the obstacles made by the simulation

under the pressure of raising durability test, and made by CNS test.

Theory:

Alternately raise and lower the handle(s) by applying a vertical force to the handle so that the rear wheels

and front wheels in turn are raised (120 ± 10) mm, measured at the start of the test from the floor and

then lowered in a controlled manner without pause.

Carry out the test for a total of 10 000 cycles at a frequency of (15 ± 2) cycles/min.

Where the downwards force necessary to lift the front wheels exceeds 450 N, carry out the test by

applying alternately a downwards 450 N force and an upwards force necessary to raise the rear wheels

for 3 000 cycles at a frequency of (15 ± 2) cycles/min, then continue the test by only raising the rear

wheels (120 ± 10) mm for additional 7 000 cycles at a frequency of (15 ± 2) cycles/min.

Specifications:

Lab Test Equipment

Professional Test Equipment

Baby Carriage Lift up and Down Test Machine Durabiliy Test for Handle Strength Images