500L IEC60529 IP5X IP6X Dust Testing Equipment WT-13
Application: outdoor lamps, household appliances, auto parts and other electronic and electrical products.
Equipment function:
The main function of the equipment is to test the physical and other related properties of the products under the simulated dust climate conditions, such as electronic and electrical products, lamps, cabinets, electrical components, automobiles, motorcycles and their parts. After the test, judge whether the performance of the product meets the requirements through verification, so as to facilitate the design, improvement, verification and delivery inspection of the product.
Standard :
IEC60529:1989 +A1:1999 +A2:2013
GB/T4208-2017 : 13.4, 13.5 and picture 3
GB7000.1 : 9.2.1,9.2.2 and picture 6.
Features:
1. Suitable for product IP5X and IP6X dust testing.
2. The inner box and turntable are all made of SUS304 stainless steel plate.
3.The housing is made from Chinese high-quality steel plate.
4. Special silicone seal ring, good elasticity, good durability.
5. The bottom of the device has replaceable dust components that make it easy to replace used dust.
6.Built in vibratory device ,it can be operated automatically alternately to prevent dust from sticking to the wall of the box and condensation.
7.The observation window is made of tempered glass and built a LED lights for easy observation of internal testing.
8. There is a pumping tube in the box, the sample can be vacuumed (samples need to be reserved for breathing holes).
- 7 inch touch screen and Panasonic PLC , The system controls the dust blower, dust vibration and test time.
- Heating system: The circulating duct is equipped with a heater to avoid dust condensation.
- Vacuum system: equipped with vacuum pump, vacuum pressure, air filtration, flow meter, connection tube.
Technical parameters :
| The size outside the water tank | 1250*1020*1755 mm (include casters) |
| The size of the inner box | 800*800*800 mm |
| Wire diameter of metal net | 50 um |
| Wire interval | 75 um |
| Talcum powder dosage | 2～4kg/m |
| Dust for testing | Dry talcum powder |
| The way to spray dust | Free dust |
| Total test time | 1S-999Hours (adjustable) |
| Vibration time | 1S -999Hours(adjustable) |
| Timing accuracy | ±1S |
| Vacuum | 0—10Kpa(adjustable) |
| Pumping speed | 0-60L/H(adjustable) |
| | |
| This tester chamber voltage | 220V,50Hz |
| Sample voltage | 220V. 50Hz |
| power | 1.5 KW ,Fire line+zero line+protective ground line(Resistance＜4Ω) |
Terms of use :
| Environmental requirements | l Ground is flat, drainage is smooth, the ground and walls are waterproof, setting ground leakage or drainage ditches. l Well ventilated. l No strong electromagnetic field around. l No flammable, non-explosive, non-corrosive substances and dust around . |
| Temperature | 5℃～35℃ |
| Humidity | ≤85% |
| Atmospheric pressure | 86kPa～106kPa |
| Power supply conditions | l Install the appropriate capacity of the leakage protection air switch for the device, the switch must be used independently of the device. l Do not use the knife-switch or power outlet. l Distance is no more than 2m from the air switch of creepage and equipment . |
Accessories:
Dry talcum powder 1 bag (approx. 2KG)
